FE Civil

Structural Engineering

10-15 questions on the exam

Analysis of determinate structures, loads and load combinations, and basic design of steel and reinforced concrete members.

Where to look on exam day: FE Reference Handbook: Civil Engineering (structural); design references cited in the handbook

Key formulas

Two common LRFD load combinations (ASCE 7)

1.4D 1.2D + 1.6L + 0.5(Lr or S or R)

ASCE 7, Chapter 2 (load combinations)

Cantilever with point load P at the tip: max moment and deflection

Mmax = P·L at the support Δmax = P·L³ / (3·E·I)

FE Reference Handbook: Mechanics of Materials (beam tables)

Reinforced concrete beam: depth of the compression block

a = As·fy / (0.85·f'c·b) Mn = As·fy·(d − a/2)

ACI 318 / FE Handbook: Design of Reinforced Concrete

Common traps

  • Using service loads where factored (LRFD) loads are required.
  • Wrong tributary width or area for distributed loads.
  • Forgetting self-weight.
  • Mixing kips and pounds, or inches and feet, in moment calculations.

Worked example

What is the theoretical effective length factor K for a column fixed at the base and free at the top?

  1. A. 0.5
  2. B. 0.7
  3. C. 1.0
  4. D. 2.0
Show solution

Answer: D. 2.0

A fixed-free (flagpole) column buckles like half of a pinned-pinned column of twice the length: K = 2.0.

FE Reference Handbook: Mechanics of Materials, Columns

Practice Structural EngineeringCreate a free account to track progress