Angles and distances, leveling, traverses, areas, earthwork volumes, horizontal and vertical curves.
Where to look on exam day: FE Reference Handbook: Civil Engineering (surveying and curves)
Key formulas
Horizontal curve: length and tangent
L = π·R·Δ / 180 (Δ in degrees) T = R · tan(Δ/2)
FE Reference Handbook: Surveying / Transportation (horizontal curves)
Differential leveling: elevation of the next point
HI = known elevation + backsight New elevation = HI − foresight
FE Reference Handbook: Surveying
Area of a closed traverse from coordinates
A = ½ · | Σ (xᵢ·yᵢ₊₁ − xᵢ₊₁·yᵢ) | (coordinate / cross-multiplication method)
FE Reference Handbook: Surveying
Common traps
- Bearings vs azimuths: convert carefully before computing latitudes and departures.
- Leveling: add the backsight, subtract the foresight.
- Degrees-minutes-seconds entered as decimals.
- Average-end-area volumes in cubic feet when the answer wants cubic yards (÷ 27).
Worked example
A benchmark has elevation 100.00 ft. The backsight on the benchmark reads 4.25 ft and the foresight on point P reads 2.10 ft. What is the elevation of P?
- A. 97.85 ft
- B. 101.05 ft
- C. 102.15 ft
- D. 106.35 ft
Show solution
Answer: C. 102.15 ft
HI = 100.00 + 4.25 = 104.25 ft. Elev P = HI − FS = 104.25 − 2.10 = 102.15 ft
FE Reference Handbook: Civil Engineering, Surveying