FE Civil

Transportation Engineering

9-14 questions on the exam

Geometric design (horizontal and vertical curves, sight distance), traffic flow and capacity, pavement basics and safety.

Where to look on exam day: FE Reference Handbook: Civil Engineering (transportation)

Key formulas

Stopping sight distance (US units)

SSD = 1.47·V·t + V² / [30·(a/32.2 ± G)] V in mph, t = 2.5 s typical, a = 11.2 ft/s²

AASHTO Green Book / FE Handbook: Transportation

Fundamental traffic flow relationship

q = k · v flow (veh/hr) = density (veh/mi) × speed (mph)

FE Reference Handbook: Transportation (traffic flow)

Vertical curve: elevation along the curve

y = y_PVC + g₁·x + (r/2)·x², r = (g₂ − g₁) / L High/low point at x = −g₁ / r

FE Reference Handbook: Transportation (vertical curves)

Minimum curve radius from superelevation and side friction

R = V² / [15·(e + f)] V in mph, R in ft, e and f as decimals (e.g. 0.06, not 6%)

AASHTO Green Book / FE Handbook: Transportation

Common traps

  • Grades in percent vs decimal in vertical curve equations.
  • Speed in mph vs ft/s (× 1.47).
  • Superelevation e and side friction f as decimals in the curve radius formula.
  • Peak hour factor applied the wrong way.

Worked example

A freeway lane has a traffic density of 40 veh/mi and a space-mean speed of 45 mph. What is the flow rate?

  1. A. 85 veh/hr
  2. B. 1,125 veh/hr
  3. C. 1,800 veh/hr
  4. D. 2,400 veh/hr
Show solution

Answer: C. 1,800 veh/hr

q = kv = (40 veh/mi)(45 mi/hr) = 1,800 veh/hr

FE Reference Handbook: Civil Engineering, Traffic Flow Relationships

Practice Transportation EngineeringCreate a free account to track progress