Depth module: loads and analysis, steel, concrete, timber and masonry member and connection design, foundations and temporary structures, per the codes NCEES lists.
Where to look on exam day: PE Civil Reference Handbook: Structural; ASCE 7, AISC 360, ACI 318 and the other standards NCEES lists
Key formulas
Moment of inertia of a rectangle about its centroidal axis
I = b·h³ / 12 (h measured perpendicular to the axis)
FE Reference Handbook: Statics
Bending (flexural) stress
σ = M·c / I c = distance from the neutral axis to the extreme fiber
FE Reference Handbook: Mechanics of Materials
Euler critical buckling load
Pcr = π²·E·I / (K·L)² K = 1.0 pinned-pinned, 0.5 fixed-fixed, 2.0 fixed-free
FE Reference Handbook: Mechanics of Materials (columns)
Simply supported beam, uniform load w: max moment and deflection
Mmax = w·L² / 8 at midspan Δmax = 5·w·L⁴ / (384·E·I)
FE Reference Handbook: Mechanics of Materials (beam tables)
Two common LRFD load combinations (ASCE 7)
1.4D 1.2D + 1.6L + 0.5(Lr or S or R)
ASCE 7, Chapter 2 (load combinations)
Cantilever with point load P at the tip: max moment and deflection
Mmax = P·L at the support Δmax = P·L³ / (3·E·I)
FE Reference Handbook: Mechanics of Materials (beam tables)
Reinforced concrete beam: depth of the compression block
a = As·fy / (0.85·f'c·b) Mn = As·fy·(d − a/2)
ACI 318 / FE Handbook: Design of Reinforced Concrete
Common traps
- Wrong load combination or missing the governing one.
- Effective length and unbraced length mix-ups in steel compression and flexure.
- Concrete: using d instead of h, or forgetting to check the tension-controlled strain.
- Development length and spacing checks skipped.
Worked example
A fixed-fixed beam spans 24 ft and carries a uniform load of 2 kip/ft. What is the fixed-end moment?
- A. 48 kip·ft
- B. 96 kip·ft
- C. 144 kip·ft
- D. 192 kip·ft
Show solution
Answer: B. 96 kip·ft
FEM = wL²/12 = (2)(24)²/12 = 96 kip·ft
PE Civil Reference Handbook: Structural, Beam Formulas