Depth module: traffic engineering and capacity, horizontal and vertical design, intersections, safety analysis, pavement design and traffic control.
Where to look on exam day: PE Civil Reference Handbook: Transportation; AASHTO Green Book, HCM, MUTCD, HSM as NCEES lists
Key formulas
Horizontal curve: length and tangent
L = π·R·Δ / 180 (Δ in degrees) T = R · tan(Δ/2)
FE Reference Handbook: Surveying / Transportation (horizontal curves)
Stopping sight distance (US units)
SSD = 1.47·V·t + V² / [30·(a/32.2 ± G)] V in mph, t = 2.5 s typical, a = 11.2 ft/s²
AASHTO Green Book / FE Handbook: Transportation
Fundamental traffic flow relationship
q = k · v flow (veh/hr) = density (veh/mi) × speed (mph)
FE Reference Handbook: Transportation (traffic flow)
Vertical curve: elevation along the curve
y = y_PVC + g₁·x + (r/2)·x², r = (g₂ − g₁) / L High/low point at x = −g₁ / r
FE Reference Handbook: Transportation (vertical curves)
Minimum curve radius from superelevation and side friction
R = V² / [15·(e + f)] V in mph, R in ft, e and f as decimals (e.g. 0.06, not 6%)
AASHTO Green Book / FE Handbook: Transportation
Common traps
- HCM adjustments applied to the wrong flow (vehicles vs passenger-car equivalents).
- Sight distance on crest vs sag curves uses different formulas.
- Crash rates per million vehicles vs per million vehicle-miles.
Worked example
Using Webster's method, find the optimum cycle length for a signal with total lost time L = 12 s and sum of critical flow ratios Y = 0.60.
- A. 38.3 s
- B. 46.0 s
- C. 57.5 s
- D. 72.0 s
Show solution
Answer: C. 57.5 s
C₀ = (1.5L + 5)/(1 − Y) = (1.5 × 12 + 5)/(1 − 0.60) = 23/0.40 = 57.5 s
PE Civil Reference Handbook: Transportation, Signal Timing